VistaFlex(R) Thermoplastic Elastomer
Source: AES (Advanced Elastomer Systems, L.P.)
Appearance Parts
Use Vistaflex to replace thermoplastic olefin (TPO) blends, styrene-block TPEs and plasticized PVC in select locations for applications requiring good surface appearance w
Use Vistaflex to replace thermoplastic olefin (TPO) blends, styrene-block TPEs and plasticized PVC in select locations for applications requiring good surface appearance w
Appearance Parts
Use Vistaflex to replace thermoplastic olefin (TPO) blends, styrene-block TPEs and plasticized PVC in select locations for applications requiring good surface appearance with elastomeric feel.
Use Vistaflex to replace thermoplastic olefin (TPO) blends, styrene-block TPEs and plasticized PVC in select locations for applications requiring good surface appearance with elastomeric feel.
Vistaflex® elastomer is a TPO with an unvulcanized rubber phase. Applications which require soft and/or medium-soft properties are good choices for this TPO, which has an elastomer grade slate below 45 Shore D hardness and flexural modulus.
Vistaflex elastomers provide
- Excellent cost/performance ratio (specific gravities .089 to 1.1)
- Very good surfaces for high quality molded products
- Halogen-free and recyclable material
- High elongation, high tear and tensile strength
- Good paint adhesion
- Good electrical properties
- Good UV resistance
- Easy coloring and good color fastness
- Plasticizer-free grades
- High flow grades
- Fluid resistance
- High temperature performance
- Compression and tension set
AES (Advanced Elastomer Systems, L.P.), 388 S. Main Street, Suite 600. Tel: 330-849-5000; Fax: 330-849-5596.