TECHNYL A 246 M Natural
Source: Rhodia - Trade North America
Description
Unreinforced and modified polyamide 66, with improved impact resistance, heat stabilized, for injection molding.
Unreinforced and modified polyamide 66, with improved impact resistance, heat stabilized, for injection molding.
Applications
TECHNYL A 246M offers an excellent
Description
Unreinforced and modified polyamide 66, with improved impact resistance, heat stabilized, for injection molding.
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than .2% with a dehumidified air drying equipment at approximately 80 degrees Celsius.
Unreinforced and modified polyamide 66, with improved impact resistance, heat stabilized, for injection molding.
Applications
TECHNYL A 246M offers an excellent notched impact resistance at low temperature make it suitable for:
- sports and leisure applications, for shoe soles, ski components, ski and surf bindings
- toy applications, such as the bumpers of a remote controlled car.
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than .2% with a dehumidified air drying equipment at approximately 80 degrees Celsius.
Barrel temperatures:
- feed zone: 250 - 270 degrees Celsius
- compression zone: 260 - 280 degrees Celsius
- front zone: 270 - 290 degrees Celsius
- 60 - 80 degrees Celsius
Rhodia - Trade North America, 2000 Argentia Road, Plaza 3, Suite 400. Tel: 905-821-4450; Fax: 905-821-8825.
This website uses cookies to ensure you get the best experience on our website. Learn more