Product/Service

Sarlink 3000

Source: DSM Thermoplastic Elastomers Inc.
Sarlink® 3000 is the best in class line of partially cross linked TPEs. Sarlink is intended for applications requiring moderate elastomeric performance but exceptional processability,
Sarlink® 3000 is the best in class line of partially cross linked TPEs. Sarlink is intended for applications requiring moderate elastomeric performance but exceptional processability, colorability and overall cosmetic appeal. All Sarlink 3000 products can be injection molded, extruded and blow molded with hardness ranging from 35 Shore A to 45 Shore D. Most standard Sarlink 3000 grades comply with relevant FDA regulations. Additionally a broad range of specialty offerings are available including enhanced flow, flame retardant, fungus resistant and UV stabilized.

The broad range of performance properties of Sarlink 3000 makes it ideally suited for a wide variety of end use applications including:

  • Automotive: under-the-hood components, protective boots, air ducts, bushings, cable covers and grommets, exterior weatherseals, gaskets and trim, and interior soft touch components, air bag doors and skins.
  • Building and Construction: glazing and weather-stripping, expansion joints, dynamic and static seals, roofing membranes, flashing and linings.
  • Industrial: hose and tubing, vibration grommets, diaphragms, wire and cable jacketing and insulation, connectors, and telecommunication grommets.
  • Consumer: soft touch utilities and personal care items, wine corks, appliance hose, connectors and boots, medical syringe tips and plungers, business machine feet and pads, furniture components and recreational grips.

DSM Thermoplastic Elastomers Inc., 31 Fuller St.. Tel: 978-534-1010; Fax: 978-534-1005.