Quick Change(TM) Double H Frames
Source: Master Unit Die Products
Quick Change Double H frame options
Quick Change Double H frame options
- Spring loaded master ejector plates
- Interlocking ejector rails
- Additional height on ejector rails
- Early return on ejector system
- Special knockout hole locations
- Runner shutoffs
- Choice of runner configuration
- Frame spacer bars
- Insulation boards
- Additional retainer slot and spacer plate
- Water lines for center sections
- Water lines for rails and plates
- Machining for heater cartridges
- Manifold for runnerless operation
- Hot tip sprue bushings
- Armorclad plating*
- Electroless nickel plating
NOTE: Specifications subject to change without prior notice.
Companion insert mold options
- Solid or laminated construction
- Stripper plates
- Interlocking ejector plates
- Return pins
- Pillar posts
- Sleeve ejection
- Machining for taper locks
- Machining for heater cartridge holes
- Machining for water lines
- Rough cut pockets
- Finished custom pockets
- Machining for special applications
- Armorclad plating*
NOTE: Specifications subject to change without prior notice.
Models
- Model 12/08 DF Quick Change 'DH' Style Frame
Companion Insert Molds (3.25 x 3.15) - Model 16/09 DF Quick Change 'DH' Style Frame
Companion Insert Molds (5.0 x 3.5) - Model 16/12 DF Quick Change 'DH' Style Frame
Companion Insert Molds (5.0 x 5.0) - Model 16/18 DF Quick Change 'DH' Style Frame
Companion Insert Molds (5.0 x 8.0) - Model 20/14 DF Quick Change 'DH' Style Frame
Companion Insert Molds (6.0 x 6.0) - Model 22/19 DF Quick Change 'DH' Style Frame
Companion Insert Molds (7.0 x 8.5) - Model 24/23 DF Quick Change 'DH' Style Frame
Companion Insert Molds (8.0 x 10.5)
Master Unit Die Products, 853 Fairplains Street, P.O. Box 520, Greenville, MI 48838. Tel: 800-253-0568; Fax: 877-683-7763.