Product/Service

PPV and HPV Hot Plate Welders

Source: Dukane Corporation, Communications Systems Division (CSD)
Dukane/T. A. Systems' vertical platen hot plate welders assemble large, contoured, or complex thermoplastic parts. All models are designed for versatility and easy tooling changeover to accommodate a
Dukane/T. A. Systems' vertical platen hot plate welders assemble large, contoured, or complex thermoplastic parts. All models are designed for versatility and easy tooling changeover to accommodate a variety of parts. All models can be "multiple tooled" so that several small parts can be welded simultaneously. Hermetic seals are easily achieved and finished part weld strength equals that of virgin material.
  • Four standard models available:
    • PPV-12 10" x 12" (254mm x 305mm) platen
    • HPV-38 12" x 38" (305mm x 965mm) platen
    • HPV-48 12" x 48" (305mm x 1219mm) platen
    • HPV-60 18" x 60" (457mm x 1524mm) platen
  • Other platen sizes available by request
  • Rugged tubular steel frame construction
  • Allen Bradley process controls standard
  • Opti-Touch light contact cycle activation switches
  • Lifetime lubricated slides
  • Available as single stations or fully automated systems
Contact your local Dukane representative regarding hot plate, hot air/cold upset or spin welding equipment or applications.

Dukane Corporation, Communications Systems Division (CSD), 2900 Dukane Drive. Tel: 630-584-2300; Fax: 630-584-3162.