Polycoat Products Announces PC-CRETE U For Waterproofing Flooring Coatings
American Polymers Corporation (dba Polycoat Products), announces PC-CRETE U (trowel and slurry) is a 3-part, heavy duty, 100% solids, aromatic, cementitious urethane mortar system typically applied at between 1/8" (3.17mm) and 3/8" (9.52mm) dry film thickness.
A New Urethane Mortar Trowel / Slurry System
American Polymers Corporation (dba Polycoat Products), announces PC-CRETE U (trowel and slurry) is a 3-part, heavy duty, 100% solids, aromatic, cementitious urethane mortar system typically applied at between 1/8" (3.17mm) and 3/8" (9.52mm) dry film thickness. It has a textured matte finish and can be used to form containment beams, integral cove bases for seamless wall to floor protection or to slope floors in horizontal applications. PC-CRETE U is custom formulated to provide a strong barrier against hydrostatic pressure and thermal shock while delivering a quick turnaround cure time. It is extremely receptive to decorative aggregate broadcast and acts as an aggressive barrier against chemicals, abrasive wear and heavy impact.
PC-CRETE U has proven its protective strength in cold rooms, freezers and commercial kitchens and is especially well suited for tough, harsh environments that require application below 40°F," stated Ashish Dhuldhoya, Senior Vice President, Polycoat Products, "It is the product we recommend to all of our flooring contractors who are looking for a cost-effective urethane mortar system solution that will limit operational downtime."
PC-CRETE U FEATURES:
- Trowel or slurry applied
- No blistering or chipping
- Quick return-to-service (4-6 hrs.)
- Can be applied below 40°F
- Excellent thermal shock and impact resistance
- Superior protection against hydrostatic pressure
- Meets California VOC and SCAQMD requirements
TYPICAL FLOOR USES:
- Cold Rooms/Freezers
- Commercial Kitchens
- Pharmaceutical
- Food and Beverage
- Manufacturing
- Metal Processing
- Warehouse/Storage
- Electronic Assembly
SOURCE: polycoat products