Product/Service

PAL-501 PNEUMATIC HOPPER LOADER

Source: Mould-tek, Inc.
The Mould-Tek PAL 501 series is a very compact, reasonably priced, and lightweight pneumatic hopper loader.

The PAL 501 has been designed to bolt right on to the feed throat of your process machi

The Mould-Tek PAL 501 series is a very compact, reasonably priced, and lightweight pneumatic hopper loader.

The PAL 501 has been designed to bolt right on to the feed throat of your process machine or if desired can be mounted on your hopper, feeder, dryer or any other auxiliary equipment.

Comes complete with remote mounting control panel, pick up lance and 10 ft. of 1" I.D. flexible hose.

Ruggedly constructed of anodized spun aluminum and aluminum alloy castings.

Does not require a motor or a discharge valve because it is powered by economical compressed air.

A solid state proximity type level switch is utilized to signal automatic refill. The proximity switch is externally mounted and eliminates paddles protruding into user's machine hopper.

Built in "No Load" visual and audible alarm alerts operator. Requires 115/1/60 Electrics and between 60-120 PSI of compressed air.

Mould-tek, Inc., 77 Nantucket Blvd.. Tel: 416-285-5400; Fax: 416-285-5432.