Excellent Release for Rubber and Thermo Plastics
Thermo Plastics: PolyPro, Polyethylene, PVC, Flexible PVC, Polyurethane, Nylon, K-Resin
Rubber Compounds: Silicone, Natural Rubber, Butyl, EPDM, Prox. Cured, Nitriles, PTFE
Nicklon-Plus® creates an excellent release condition on no draft cores, cavities, deep ribs , bosses & EDM on compression or injection tooling. Outstanding corrosion and staining is generally eliminated with Nicklon-Plus®.
Results with Nicklon-Plus® may vary due to mold design, resin properties and operating parameters.
Due to the homogeneous distribution of autocatalytic nickel and PTFE, there is a continual renewal of PTFE as the mold surface sustain normal wear. PTFE topical treatment will degenerate over time as the PTFE breaks down and the topcoat wears off the mold surface.
Benefits of Nicklon-Plus®
A Few of the Clients Using Nicklon-Plus®
- Enhances resin Flow by 4-8%
- Creates excellent release condition on no-draft or difficult-to-eject parts. Eliminates mold release sprays.
- Ensures a uniform application in deep ribs, bosses and complex details.
- Extends mold life through its high corrosionresistanttcharacteristicss.
AT&T, Abbott Laboratory, Berry Plastics, Corpak, Eaton, ITW Deltar, Master Precision, Nike, Norwesco, Packard Seal, Precitec Corporation, Stepco Corporation, 3-M, Wheaton Industries, Xerox
Micro Surface Corporation, 465 E. Briscoe Dr., P. O. Box 788570. Tel: 815-942-4221; Fax: 815-942-4265.