Product/Service

Model #50

Source: Mini-Jector Machinery Corp.

The Model 50 "Wasp" Mini-Jector injection molding machine has a self contained hydraulic system that does away with the need for an outside air source. The Model 50 is a benchtop unit that requre

The Model 50 "Wasp" Mini-Jector injection molding machine has a self contained hydraulic system that does away with the need for an outside air source. The Model 50 is a benchtop unit that requres only a 230 volt single phase current supply of at least 20 amps. The 2000 PSI system delivers 2 gallons of oil per minute to the 2" bore hydraulic injection cylinder through a solenoid operated directional valve. The 1725 RPM 2 HP electric motor is controlled by a motor starter that has overload protection coils. An indepedent relief valve and oil filled pressure gauge allow for precise injection pressure settings. The Model 50 features manual or semi automatic operation capabilities.

Specifications
(Specifications may change without notice)

Injection volume-in. 3 @ (plunger diameter)
1/21.178
5/81.841
3/42.651
7/8

3.608
Injection pressure-PSI @ 2000 PSI @ (plunger diameter)
1/232,000
5/820,480
3/414,223
7/8

10,449
Max. shot size-ounces Polystyrene @ (plunger diameter)
1/2.33
5/8.50
3/4.75
7/8

1.00
Cylinder Heater Wattage1,050
Nozzle Heater Wattage150
Plasticizing Capacity-Lbs. Per Hour10
Injection Cylinder Bore-inches2.0
Injection Cylinder Stroke-inches6.0
Approx. Maximum Clamp Force-Tons11.75
Maximum Casting Area-in. 26.0
Mold Ejection Force-Lbs3313
Hopper Capacity-Lbs. Polystyrene13
Max. Mold Size-WxLxH-inches7.00x3.00x2.125
Power Consumption-AMPS (230 Single Phase)19.6
Machine Shipping Weight-Lbs550
Overall Dimensions-WxLxH33.25x25.63x43

Mini-Jector Machinery Corp., PO Box 259. Tel: 440-564-7210; Fax: 440-564-5432.