Model 1456 Granulator

Throat Size: 14" x 56" (356mm x 1422mm)
Cutting Circle Diameter: 14" (360mm)
Thruput (Approximate)*: Up to 2,200 lbs./hr. (1000kg.)

Description

For reclaiming thermoformed, extruded scrap, sheet, web & edge trim and central granulation of parts & film.

Application

High capacity on-line reclamation of sheet, filament and foam (with simultaneous manual or automatic feeding where required). Sheet up 1/2" thick and up to 56" width. Flat sheet, roll sheet from an unwind stand, thermoformed sheet, amorphous film, fibers, foils, packaging materials, wide pieces of tough plastic with heavy cross sections.

Features & Benefits

• Rotor is open (wing) design manufactured in high alloy steel, producing high quality granulates.
• The inside of the cutting chamber is machined to an exceptionally high finish. No unfinished welds.
• Removal of front panel gives quick access to cutting chamber and swing down screen cradle for ease of service and cleanout.
• The rotor knives are bolted to the rotor with high strength alloy steel bolts.
• Double-sealed, outboard mounted, heavy-duty spherical bearings prevent bearing contamination.
• 3 Chevron-positioned rotor knives scissor cut against the bed knives to provide optimum cutting efficiency, with low power consumption.
• The heavy-duty construction allows this granulator to attain noise reduction of 85 dbA or less for most applications.

* "Thruput values are approximate only and are dependent upon your specific application. Variables such as material type, form and temperature, feed method, rotor configuration, knife sharpness and design, screen size, as well as evacuation system configuration all contribute to the overall capability of the equipment. Contact Cumberland Engineering for more specific information regarding your application."

Cumberland Engineering Corporation, 100 Roddy Avenue, South Attleboro, MA 02703-7951. Tel: 508-399-6400; Fax: 508-399-6653.