Model 1426I Granulator

Throat Size: 14" x 26" (356mm x 660mm)
Cutting Circle Diameter: 16.5" (419mm)
Thruput (Approximate)*: Up to 1,200 lbs./hr. (544kg.)

Description

For reclaiming injection molded, blow molded or extruded scrap.

Application

Blow moldings, automotive moldings, ducts, furniture and appliance parts, sprues, runners, bottles, profiles, pipe, light purgings, X-ray film, film and sheet (to 3/16" thick), cosmetic and pharmaceutical destruction.

Features & Benefits

• Heavy-duty construction allows intermediate size granulator to handle heavier loads.
• Dual flywheels add inertia and deliver the equivalent of additional horsepower.
• Heavy-duty carriers support entire knife cutting edges to withstand high-impact stress.
• The rotor knives are bolted to the rotor with high strength alloy steel bolts.
• Outboard mounted, heavy-duty roller bearings prevent bearing contamination.
• Open-wing rotor produces high quality granulates.
• 3 Chevron-positioned rotor knives scissor cut against the bed knives to provide optimum cutting efficiency, with low power consumption.
• The upright, pivoted, tray feed hopper has a removable infeed muffler and sound-absorbent materials to minimize airborne and structural noise.
• The heavy-duty construction allows this granulator to attain noise reduction of 85 dbA or less for most all applications with no additional enclosures.

* "Thruput values are approximate only and are dependent upon your specific application. Variables such as material type, form and temperature, feed method, rotor configuration, knife sharpness and design, screen size, as well as evacuation system configuration all contribute to the overall capability of the equipment. Contact Cumberland Engineering for more specific information regarding your application."

Cumberland Engineering Corporation, 100 Roddy Avenue. Tel: 508-399-6400; Fax: 508-399-6653.