Microlon 1010
Source: Micro Surface Corporation
This resin matrix bonded coating provides the optimum combination of wear resistance, low coefficient of friction, and excellent nonstick (AKA "release"). Microlon 1010 is unaffected by or resistant
This resin matrix bonded coating provides the optimum combination of wear resistance, low coefficient of friction, and excellent nonstick (AKA "release"). Microlon 1010 is unaffected by or resistant to most chemicals and corrosive agents. It has an operating temperature to 500 degrees Fahrenheit (260 degrees Celsius) continuous and 600 degrees Fahrenheit (315 degrees Celsius) intermittent.
Microlon 1010 is an excellent lubricant and can withstand loads up to 50,000 psi. For this reason, it has been successfully used in the automotive industry on pistons, rocker arms, wrist pins, and other bearing surface applications. It may be used to prevent scoring and galling, or provide secondary lubrication due to the failure of the primary (conventional) lubricant. Additionally, Microlon 1010 has good abrasion resistance and therefore, may be used to solve varying problems from release to friction reduction.
Micro Surface Corporation, 465 E. Briscoe Dr., P. O. Box 788570. Tel: 815-942-4221; Fax: 815-942-4265.