Isocor(TM) HW115SI
Source: Shakespeare Company
Description
Isocor™ HW115SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Iso
Isocor™ HW115SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Iso
Description
Isocor™ HW115SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ HW115SI is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Isocor™ HW115SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ HW115SI is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.
Applications
Typical applications for Isocor™ HW115SI include:
- extrusion/wire coatings
- film extrusions
- bristles
- tubing/profile extrusions
| ASTM | TYPICAL VALUES | |||||
| PROPERTY | METHOD | UNITS | DAM | 50% R.H. | ||
| | ||||||
| Specific Gravity | D-792 | - - | 1.07 | - - | ||
| Melting Point | DSC | C (F) | 215 (419) | - - | ||
| Tensile Strength | D-638 | MPa(kpsi) | 60(8.7) | 52 (7.5) | ||
| Elongation @ Break | D-638 | % | 100 | 300 | ||
| Flexural Modulus | D-790 | MPa (kpsi) | 2,000 (290) | 1,310 (189) | ||
| Notched Izod impact | D-256 | J/m (ft-lb/in) | 48 (0.9) | 200 (3.8) | ||
| Heat Deflection Temp. (264psi / 1.8 Mpa) | D-648 | C (F) | 66 (151) | 60 (140) | ||
| Heat Deflection Temp. (66psi / 0.45 Mpa) | D-648 | C(F) | 175 (347) | 160 (320) | ||
| Water Absorption - 24 hour Immersion | D-570 | % | - - | 1.4 | ||
| Taber Abrasion | D-1044 | mg / 1000 | 6 | - - | ||
| Mold Shrinkage (0.125 in) | - - | % | 1.1 | - - | ||
Shakespeare Company, 6111 Shakespeare Road. Tel: 803-754-7011; Fax: 803-754-7991.