Product/Service

In-Line Leak Testing Machine for Flow Wrapped Applications

Source: TASI Group: Bonfiglioli Engineering and Sepha

PK-VF

The Leak Testing Machine is used for in-line Non-Destructive Container Closure Integrity Testing. It performs the Leak Testing process in continuous operation by means of Testing Chambers under Vacuum which are installed on to a rotating Central Carousel.

The Leak Testing Machine is used for in-line Non-Destructive Container Closure Integrity Testing. It performs the Leak Testing process in continuous operation by means of Testing Chambers under Vacuum which are installed on to a rotating Central Carousel. Following Leak Testing process, the Containers are automatically unloaded from Testing Area and they are managed according to the result. Whether the result is Conforming or Non-Conforming, the HMI clearly displays the status. The Measurement System provides both a “gross” and a “fine” leak test detection range.

Advantages

  • High speed leak testing
  • Non Destructive Rapid and accurate analysis
  • 100% control and not statistical
  • Homogeneous leak detection
  • Easy validation and leakage certification
  • Automatic cleaning pocket to avoid false rejects
  • No alteration of product’s properties
  • Easy access and cleaning
  • Low energy consumption
  • Displaying recording and printing of the tests results
  • Software based on SCADA platform configurable to comply with CFR21 part II norms