E/Z Prime 952(TM)
E/Z Prime 952(TM) is a water-soluble polymer that is especially well suited for promoting adhesion of polyethylene and polypropylene resins to various other supporting films an
E/Z Prime 952(TM) is a water-soluble polymer that is especially well suited for promoting adhesion of polyethylene and polypropylene resins to various other supporting films and papers used in extrusion coating, laminating and printing. E/Z Prime 952(TM) also has served as a preprint primer and for dry-bond laminating.
Features
- USDA and FDA components approved for packaging.
- High bond levels.
- Used as supplied—no diluting necessary.
- Stable, 9-month shelf life if kept tightly closed.
- Ease of drying.
- Spills clean up with water.
- Non-hazardous to workers and environment.
- Fully recoverable if frozen.
- PE, LDPE, HDPE
- Polyester
- PVDC, OPP, EVA
- Nylon
Application Conditions
In general, application conditions should correspond to the following:
| Room Temperature | 50 degrees F and up |
| Solution Temperature | 35 degrees F to 160 degrees F |
| Application Method | Direct Gravure, or Flexo with very fine line and up |
| Accepting Film | Corona treated recommended |
| Extrudate Condition | Should be oxidized while coating |
Typical Properties
| Appearance | ............... | Cloudy off-white solution |
| Solids | ............... | 5% or customer specified |
| Density | .............. | 1.007 |
| Viscosity | ............... | 5-15 cps |
| Weight/Gallon | ............... | 8.39 lbs. |
| pH | ............... | 10.8-11.5 |
Safety
| Material Safety Data Sheet | Material Data Safety Sheet for E/Z Prime 950(TM) is available. |
| Labeling | E/Z Prime 950(TM) is not classified as a hazardous substance under DOT or OSHA regulations or as a controlled product under WHIMS (Canada regulations). It does not contain any hazardous components at levels which have implications for labeling. |
Elm Grove Industries, Inc., is a global supplier of specialty chemical products for the plastics and packaging industries.
The information contained herein is intended to assist you in determining the suitability of our product for your commercial or industrial applications. As performance characteristics vary according to application, operating conditions, use, etc., we recommend that you test our products to determine to your satisfaction that quality and performance are suitable for your particular purpose. Nothing herein shall constitute a warranty of any kind, express or implied, including but not limited to warranty of merchantability or fitness, nor is protection from any patent to be inferred.
Elm Grove Industries, Inc., PO Box 659, 910 Elm Grove Rd., Elm Grove, WI 53122. Tel: 262-797-9244; Fax: 262-797-9763.