Disc Dosing Systems Mico
Source: Colortronic, Inc.
Colortronic's Mico is a disc dosing system for plastic pellets, free flowing/non-free flowing additivs and regrinds. The typical applications are injection molding, blow molding and extrusion. With
Colortronic's Mico is a disc dosing system for plastic pellets, free flowing/non-free flowing additivs and regrinds. The typical applications are injection molding, blow molding and extrusion. With Mico dosing and blending units the main component of the raw material flows directly into the mixing hopper and the additives are dosed proportionately according to the shot weight. By monitoring the level in the mixing hopper, overfilling is avoided and simultaneously guarantees homogenous blending.
Our design makes material changeover almost effortless. Simply lift two quick disconnects and lift off the additive station. By the use of a spare station, changeover is immediate. If you elect not to purchase a spare station, clean up and material change occurs off the machine in minutes, reducing downtime and risk of injury. Additive may also be automatically loaded by the use of one of Colortronic's hopper loaders.
- The main component flows directly into the mixer hopper
- Max. 2 additive dosing stations
- Level sensor for mixing hopper
- Ability to handle materials up to 80 degrees C (176 degrees F)
- Operating voltage 400 VAC ±10 %, 50/60 Hz
Colortronic, Inc., 155 9th East Avenue. Tel: 609-312-9600 ; Fax: 609-312-9696.