CR-Series Extruder Fluff Crammer Hoppers Feed System

Ground fluff is stored in an agitated straight-wall rectangular round-bottom storage tank. A variable-speed horizontal trough auger assembly meters the ground fluff into the vertical screw extruder-mounted crammer hopper. Each system includes a standard 50 cu. ft. (1,415 liter) capacity agitated fluff storage tank; however, larger tanks are available and may be required, based on application. An infrared photo cell controller cycles the horizontal auger assembly to provide a constant head of material around the vertical crammer screw. The vertical screw is a heavy-duty variable-speed hydraulic drive unit with an operator-adjustable rate. A sensor shuts down the crammer unit if the extruder screw speed slows below the set point adjustment.

• All fluff storage hoppers come standard with variable-speed horizontal metering auger
• Side cleanout door with safety switch for access
• All vertical screw crammer feeders come standard with 20-gallon (75 liter) reservoir hydraulic power pack
• Heavy-duty welded auger with breaker arms
• Heavy-duty planetary gear reduction

AEC/HydReclaim, 3145 Copper Avenue. Tel: 810-629-6441; Fax: 810-629-5088.