BOY 30
The BOY 30 series is a fully hydraulic reciprocating screw injection molding machine with four tie bars and a two-platen clamping unit. The extremely rigid, torsion-proof
The BOY 30 series is a fully hydraulic reciprocating screw injection molding machine with four tie bars and a two-platen clamping unit. The extremely rigid, torsion-proof clamping system and the precision of the injection unit, make these machines ideal for producing close tolerance precision parts.
The BOY 30 is the most compact injection molding machine in its performance class. This 33.7 US ton machine features a large clamp stroke, daylight and tie bar clearance. The clamp is supported on linear bearings with precision guidance. Shot capacities range from .5 ounce to 2.25 ounce. The 30 is available with the Dipronic(R) (30D), the PROCAN II Control(R) (30M), or the Procan CT.
The price vs. performance ratio is unbeatable.
Screw Diameter
16, 18, 22, 24, 24, 28, 32 mm
Shot Capacity, 80% theoretical, GPS
gms./oz. -- 14/.49, 18/.63, 27/.95, 32/1.13, 36/1.27, 49/1.73, 64/2.26
Injection Pressure, max.
PSI -- 48,152 | 37,521 | 25,120 | 21,103 | 26,251 | 19,435 | 14,938
Clamping Force
US Tons -- 33.7
Mold Opening Stroke, Adj.
mm/in. -- 300/11.81
Daylight, max.
mm/in. -- 500/19.69
Distance between 4 tie bars, H&V
mm/in. -- 280 X 254/11 X 10
Dimensions (horizontal inj.)
L"W"H" -- 97" X 33.9" X 74.8"
Boy Machines, Inc., 19 Phillips Road. Tel: 610-363-9121; Fax: 610-363-0163.