BOY 22
This series has been built to the same basic technical concept since 1968. Well over twenty thousand machines of this type have been delivered to customers to date. Soph
This series has been built to the same basic technical concept since 1968. Well over twenty thousand machines of this type have been delivered to customers to date. Sophisticated down to the very last detail, the machine stands out through its great reliability, energy efficiency and flexibility.
The 22 series injection molding machine was designed with a two platen clamping unit. It is exceedingly compact with a free standing clamping unit. Sophisticated down to the very last detail, the machine stands out through its great reliability and extremely low running costs. This machine has been proven in thousands of applications with the most demanding processing requirements.
This 24.2 US ton machine features a large clamp area for up to a 9-7/8 x 12 mold base with a 10.0 inch tie bar clearance. Shot capacities range from .5 ounce to 2.0 ounce. The 22 series is available with the Dipronic(R) (22D), the PROCAN II Control(R) (22M), or the Procan CT. A variety of plasticizing units are available for processing a wide range of materials.
The 22 series offers a wide range of flexibility for all applications.
Screw Diameter
16, 18, 22, 24, 28, 32 mm
Shot Capacity, 80% theoretical, GPS
gms./oz. -- 14/.49, 18/.63, 27/.95, 32/1.12, 44/1.55, 57/2.01
Injection Pressure, max.
PSI -- 48,152 | 37,521 | 25,120 | 21,103 | 15,504 | 11,864
Clamping Force
US Tons -- 24.2
Mold Opening Stroke, Adj.
mm/in. -- 200/7.87
Daylight, max.
mm/in. -- 400/15.75
Distance between 2 tie bars, H&V
mm/in. -- 254/10.00
Dimensions (horizontal inj.)
L"W"H" -- 95.4 X 31.9 X 63.8
Boy Machines, Inc., 19 Phillips Road. Tel: 610-363-9121; Fax: 610-363-0163.