Product/Service

AF-III ADDITIVE FEEDER

Source: Mould-tek, Inc.
Mould-Tek's highly accurate Microprocessor Based AF-III Additive Feeder precisely meters pelletized color concentrate or free flowing additives into the main flow of natural material. The Automatic S
Mould-Tek's highly accurate Microprocessor Based AF-III Additive Feeder precisely meters pelletized color concentrate or free flowing additives into the main flow of natural material. The Automatic Speed control eliminates the need for manual adjust motor speed associated with volumetric units. The microprocessor measures the screw recovery time of each cycle, totalizes the auger revolutions and calibrates to the precise meter rate of requested set value. Color metering occurs uniformly over the entire screw recovery cycle. Should screw recovery cycle time change the motor speed and metering rate adjust automatically retaining the set value. A simple formula based on shot weight and percentage of color is used to attain set value.

Constructed of high grade aluminum alloy the AF-III unit will stand up to the loads and vibrations of the most demanding applications. Standard augers are 1/2", 3/4" and 1" each installed in a companion barrel sleeve, light weight hopper with lid and swing away drive for quick auger change are all standard.

Mould-tek, Inc., 77 Nantucket Blvd.. Tel: 416-285-5400; Fax: 416-285-5432.