P-200

FANUC Robotics' P-200 System integrates the industry's most advanced process equipment to enhance painting performance and improve our customers' bottom line results.

Paint waste, color change time, and cycle time are reduced by integrating the color changer and fluid control valves close to the applicator. This provides in-creased throughput or increased spraying time which improves transfer efficiency.

A feasible replacement for manual sprayers, the P-200 system easily handles tough applications including interior and exterior cut-ins and fascia painting. Key advantages for interior cut-in painting are the P-200 System's near reach capability and flexibility.

FANUC Robotics is the leader in providing total paint shop auto-mation solutions. Based on experience gained over seven generations of robotic painting designs, the P-200 System delivers a flexible and state-of-the-art painting solution.

Process Advantages

• Color change valves mounted close to the applicator reduce paint waste and color change time. Shortened paint line lengths also permit longer spraying time and higher throughput.
• In-arm hardware and enhanced motion software allow fast "on-the-fly" applicator parameter changes, providing improved paint quality, film build consistency and less paint overspray. This results in reduced costs and higher profit per vehicle or part.
• Maximized trigger accuracy and repeatability through in-arm trigger valve for fast gun on/off response time.
  • Reduced paint waste
  • Higher film build consistency
  • Accurate path teaching
  • Higher quality
  • Reduced setup and debug time
• Paints entire hood and deck interiors from one body side, which typically reduces number of robots needed.
• Fits into existing booths or greenfield plants, significantly reducing booth construction and operating expenses including airflow and energy costs.
• User-friendly AccuFlow II™ closed loop fluid delivery system automatically calculates flow rates, providing consistent paint delivery, and high finish quality.
• Heavy payload (15kg at wrist, 15kg in outer arm) carries current applicators with flexibility for future applicator technology to provide a longer lasting paint shop solution.
• Enhanced motion software maximizes acceleration and deceleration to improve path accuracy and minimize non-painting time, resulting in reduced cycle and startup/debug time.

FANUC Robotics North America, Inc., 3900 West Hamlin Rd.. Tel: 800-47-ROBOT; Fax: 248-276-4133.