Flex-Dura(R)
Rugged, reliable, and easy to operate, the Flex-Dura® gives automotive and other large-part molders greater control over the melt, gate, and ultimately part quality.
Whether you're molding interior trim panels, lamp housings or bumper facia, Flex-Dura® offers sizable benefits over competing hot runners. Using proven Dura® technology and a single profile heater element, Flex-Dura® provides unmatched temperature performance, yet requires only one zone of control.
Because nozzles are screwed into the manifold and assembled cold, heat expansion tends to apply a bending movement over the length of the nozzle. Flex-Dura® absorbs this force with a natural "flex" inherent in the design. This "flexing" ensures long hot runner life and consistent performance, shot after shot.
Flex-Dura® Hot Runner Product Line | Approximate Shot Size Range | Nozzle Runner Diameter (non-valve/valve gate) |
---|---|---|
Flex-Dura® Pico | Less than 15 grams | 5.0/7.0 mm |
Flex-Dura® Centi | 5 to 50 grams | 6.0/8.0 mm |
Flex-Dura® Deci | 50 to 500 grams | 8.0/11.0 mm |
Flex-Dura® Hecto | 500 to 3500 grams | 12.0/16.0 mm |
Mold-Masters Limited, 233 Armstrong Avenue. Tel: 905-877-0185; Fax: 905-873-2818.