40 ton Vertical machine Stationary Type
Machine Specs
Clamping Unit
| Clamping System | Direct Pressure Type | |
| Max Clamping Force | tf (US ton) | 40 (44) |
| Tie Bar Distance | mm (inch) | 360 x 360 (14.2 x 14.2) |
| Platen Dimension | mm (inch) | 470 x 470 (18.5 x 18.5) |
| Max. Clamping stroke | mm (inch) | Max. 200 (7.9) |
| Min. Mold Thickness | mm (inch) | 230 (7.9) |
| Daylight | mm (inch) | 430 (16.9) |
| Ejector system | Hydraulic 1-point | |
| Ejector force | tf (US ton) | 3.5 (3.9) |
| Ejector Stroke | mm (inch) | 40 (1.6) |
Injection Unit
| Injection & plasticization System | Pre - Plasticating | |
| Screw Diameter | mm (inch) | 25 (1.0) |
| Plunger Diameter | mm (inch) | 22 (0.9) |
| Max. Injection Pressure | kgf/cm ² (psi) | 2610 (37555) |
| Theoretical Injection volume | cm³ (oz) | 27 (0.95) |
| Injection Rate | cm³/sec (oz/sec) | 114 (4) |
| Plunger Stroke | mm (inch) | 70 (2.8) |
| Max. Injection Speed *** | mm/sec (inch/sec) | 300 (11.8) |
| Plasticating Capacity | kg/h (lb/h) | 17 (37.5) |
| Max Screw Revolution | rpm | 280 |
| Rated Screw Torque | kgf · m (lbf · ft) | 25 (86.3) |
| Number of temperature control zones | 4 | |
| Heating Capacity | kw | 4.6 |
| Nozzle Pressure Force | kgf (kN) | 2000 (19.6) |
| Injection unit stroke | mm (inch) | 220 (8.7) |
Electric & Hydraulic System
| Motor capacity for hydraulic pump | kw | 7.5 |
| Hydraulic Pressure | kgf/cm ² (psi) | Max. 180 (2552) |
| Tank Capacity | l (gal) | 75 (19.7) |
Machine Dimension & Weight
| Machine Dimension | mm (inch) | 1944.5 x 1300 x 2850 (76.6 x 51.2 x 112.3) |
| Machine Weight | kg (lb) | 3000 (6613.8) |
Specifications are subject to change without prior notice due to continual research and development.
Sodick, Inc., 851 Feehanville Drive. Tel: 847-759-6720; Fax: 847-759-6721.