260 ton Injection molding machine
Machine Specs
Clamping Unit
Clamping System | Direct Pressure Type | |
Max Clamping Force | tf (US ton) | 260 (286.6) |
Tie Bar Distance | mm (inch) | 610 x 610 (24.0 x 24.0) |
Platen Dimension | mm (inch) | 880 x 880 (34.6 x 34.6) |
Max. Clamping stroke | mm (inch) | 500 (19.6) |
Min. Mold Thickness | mm (inch) | 300/600 (11.8/23.6) |
Daylight | mm (inch) | 800 (31.5) |
Ejector system | Hydraulic 5-point (9 hole Option) | |
Ejector force | tf (US ton) | 6.0 (6.6) |
Ejector Stroke | mm (inch) | 130 (5.1) |
Injection Unit
Injection & plasticization System | Pre – Plasticating | |
Screw Diameter | mm (inch) | 50 (1.9) |
Plunger Diameter | mm (inch) | 50 (1.9) |
Max. Injection Pressure | kgf/cm ² (psi) | 2240 (31856.5) |
Theoretical Injection volume | cm³ (oz) | 392 (13.8) |
Injection Rate | cm³/sec (oz/sec) | 392 (13.8) |
Plunger Stroke | mm (inch) | 200 (7.9) |
Max. Injection Speed *** | mm/sec (inch/sec) | 300 (11.82) |
Plasticating Capacity | kg/h (lb/h) | 140 (308.6) |
Max Screw Revolution | rpm | 200 |
Rated Screw Torque | kgf · m (lbf · ft) | 130 (939.7) |
Number of temperature control zones | 7 | |
Heating Capacity | kw | 20 |
Nozzle Pressure Force | kgf (kN) | 3600 (35.3) |
Injection unit stroke | mm (inch) | 500 (19.6) |
Electric & Hydraulic System
Motor capacity for hydraulic pump | kw | 22 |
Hydraulic Pressure | kgf/cm ² (psi) | 210 (2987) |
Tank Capacity | l (gal) | 360 (94.6) |
Machine Dimension & Weight
Machine Dimension | mm (inch) | 4700 x 1455 x 1855 (185.1 x 57.3 x 73.1) |
Machine Weight | kg (lb) | 9700 (21384.6) |
Specifications are subject to change without prior notice due to continual research and development.
Sodick, Inc., 851 Feehanville Drive. Tel: 847-759-6720; Fax: 847-759-6721.